O truque inteligente de batteries que ninguém é Discutindo
O truque inteligente de batteries que ninguém é Discutindo
Blog Article
Batteries were invented in 1800, but their complex chemical processes are still being explored and improved. Scientists are using new tools to better understand the electrical and chemical processes in batteries to produce a new generation of highly efficient, electrical energy storage systems. While we may be more familiar with the rechargeable batteries we use every day in personal electronics, vehicles, and power tools, batteries are also essential for large-scale electricity storage to support the grid, and for storing the power generated by renewable sources.
This battery finds application in high-drain devices due to its high capacity and energy density. They are generally used as an alternative because they have a slightly lower but generally compatible cell voltage.
These types of batteries are composed of cells in which lithium ions move from the negative electrode through the electrolyte to the positive electrode during discharge and back when it’s charging. Lithium-ion batteries are used in heavy electrical current usage devices such as remote car fobs.
Batteries and similar devices accept, store, and release electricity on demand. Batteries use chemistry, in the form of chemical potential, to store energy, just like many other everyday energy sources. For example, logs and oxygen both store energy in their chemical bonds until burning converts some of that chemical energy to heat. Gasoline and oxygen mixtures have stored chemical potential energy until it is converted to mechanical energy in a car engine. Similarly, for batteries to work, electricity must be converted into a chemical potential form before it can be readily stored. Batteries consist of two electrical terminals called the cathode and the anode, separated by a chemical material called an electrolyte. To accept and release energy, a battery is coupled to an external circuit.
g., a lamp or other device) must be provided to carry electrons from the anode to the negative battery contact. Sufficient electrolyte must be present as well. The electrolyte consists of a solvent (water, an organic liquid, or even a solid) and one or more chemicals that dissociate into ions in the solvent. These ions serve to deliver electrons and chemical matter through the cell interior to balance the flow of electric current outside the cell during cell operation.
Other primary wet cells are the Leclanche cell, Grove cell, Bunsen cell, Chromic acid cell, Clark cell, and Weston cell. The Leclanche cell chemistry was adapted to the first dry cells. Wet cells are still used in automobile batteries and in industry for standby power for switchgear, telecommunication or large uninterruptible power supplies, but in many places batteries with gel cells have been used instead. These applications commonly use lead–acid or nickel–cadmium cells. Molten salt batteries are primary or secondary batteries that use a molten salt as electrolyte. They operate at high temperatures and must be well insulated to retain heat.
While there are several types of batteries, at its essence a battery is a device that converts chemical energy into electric energy. This electrochemistry happens through the flow of electrons from one material (electrode) to another, through an external circuit. The flow of electrons provides an electric current that can be used to do work.
Secondary batteries can also be known as rechargeable batteries. The chemical reaction that takes place can in theory be reversed and this will put the cell back to its original state. They can be used in two different ways, firstly they can be used as a storage device. They are connected to the main energy source and will provide a backup when mains power is lost. Used in this way they basically replace the mains supply when it may be lost, when used in this way they are called UPS – which stands for uninterrupted power supplies.
The C-rate is a measure of the rate at which a battery is being charged or discharged. It is defined as the current through the battery divided by the theoretical current draw under which the battery would deliver its nominal rated capacity in one hour.[51] It has the units h−1. Because of internal resistance loss and the chemical processes inside the cells, a battery rarely delivers nameplate rated capacity in only one hour. Typically, maximum capacity is found at a low C-rate, and charging or discharging at a higher C-rate reduces the usable life and capacity of a battery.
New methods of reuse, such as echelon use of partly-used batteries, add to the overall utility of electric batteries, reduce energy storage costs, and also reduce pollution/emission impacts due to longer lives.
Batteries that successfully traverse the esophagus are unlikely to lodge elsewhere. The likelihood that a disk battery will lodge in the esophagus is a function of the patient's age and battery size. Older children do not have problems with batteries smaller than 21–23 mm. Liquefaction necrosis may occur because sodium hydroxide is generated by the current produced by the battery (usually at the anode). Perforation has occurred as rapidly as seis hours after ingestion.[77]
Encyclopaedia Britannica's editors oversee subject areas in which they have extensive knowledge, whether from years of experience gained by working on that content or via study for an advanced degree. They write new content and verify and edit content received from contributors.
This technology contains liquid electrolyte in an unsealed container, requiring that the battery be kept upright and the area be well ventilated to ensure safe dispersal of the hydrogen gas it produces during overcharging. The lead–acid battery is relatively heavy for the amount of electrical energy it can supply. Its low акумулатори бургас manufacturing cost and its high surge current levels make it common where its capacity (over approximately 10 Ah) is more important than weight and handling issues. A common application is the modern car battery, which can, in general, deliver a peak current of 450 amperes.
Sodium-Metal Halide: Also known as ZEBRA batteries, these hold potential as stationary batteries used to store energy for the grid. PNNL researchers have developed a design that is more stable and less expensive to manufacture, with increased energy density.